Toro TIMECUTTER 74685 Service Manual page 82

MYRIDE® Seat/Platform Removal (continued)
Chassis: Service and Repairs
g301741
10. Using a T–30 torque bit, remove the 3 screws securing the pod to the pod
support brackets. Repeat for opposite side.
11. Move the motion control from the neutral lock to the neutral position.
12. Using a Philips head screw driver, remove the screw securing the smart
speed knob to the smart speed lever. Remove the smart speed knob from
the smart speed lever.
g301691
13. Using a Philips head screw driver, remove the screw securing the control
panel to the RH pod. Move the control panel to the side.
Figure 86
Figure 87
Page 5–32 TIMECUTTER® Service Manual
3433-938 Rev A