Toro TIMECUTTER 74685 Service Manual page 209

Starter Solenoid Removal (continued)
Starter Solenoid Installation
TIMECUTTER® Service Manual
3433-938 Rev A
g302126
7. Remove the 2 (3/8 inch) bolts securing the starter solenoid to the chassis.
g302127
8. Remove the starter solenoid from the chassis.
1. Install the starter solenoid to the chassis.
2. Install the 2 (3/8 inch) bolts securing the starter solenoid to the chassis.
Torque bolts to 3–4.5 N • m (35–40 in-lb).
Figure 295
Figure 296
Page 8–21 Electrical System: Service and Repairs