Toro TIMECUTTER 74685 Service Manual page 210

Starter Solenoid Installation (continued)
Electrical System: Service and Repairs
g302127
3. Install the blue and green wires to the main harness to the starter solenoid.
g302126
4. Install the 2 (½) inch nuts securing the battery cable and the starter power
cable to the starter solenoid. Torque nuts to 3–4.5 N • m (35–40 in-lb).
Note: The battery cable side has an additional red wire for the chassis
harness.
Figure 297
Figure 298
Page 8–22 TIMECUTTER® Service Manual
3433-938 Rev A