Toro TIMECUTTER 74685 Service Manual page 112

Steering Control Box Installation (continued)
Chassis: Service and Repairs
g301705
12. Install the 2 front pod mounting screws (T–30). Torque screws to 11 N •
m (100 in-lb).
13. Remove the cap from the hoses. Install the fuel hose and fuel vent hose to
the fuel tank fittings. Secure with spring clamps.
Note: The fuel hose and fuel vent hose ports and hose orientation are
labeled on the fuel tank.
g301704
14. Place the RH pod into position on the machine.
15. Install the control panel. Hand tighten with the screw securing the control
panel to the RH pod.
Figure 144
Figure 145
Page 5–62 TIMECUTTER® Service Manual
3433-938 Rev A