Toro TIMECUTTER 74685 Service Manual page 88

MYRIDE® Seat/Platform Installation (continued)
Chassis: Service and Repairs
g301771
May need assistance to perform next step. Springs are under
extreme load.
2. Install the 2 (9/16 inch) inch nuts and bolts securing the MYRIDE® trailing to
the chassis. Torque nuts and bolts to 40.5–44.5 N • m (30–33 ft-lb).
g301770
3. Install the 2 (1/2 inch) bolts and nuts securing the MYRIDE® stop bracket
to the MYRIDE® platform. Torque the bolts and nuts to 22.5–25 N • m
(200–225 in-lb).
Figure 98
CAUTION
Figure 99
Page 5–38 TIMECUTTER® Service Manual
3433-938 Rev A