Pod Replacement - Toro TIMECUTTER 74685 Service Manual

Stub Shaft Installation (continued)

Pod Replacement

Pod Removal
Chassis: Service and Repairs
g300688
8. Install the wheel to the machine. Secure with the ¾ inch bolt and nut securing
the wheel to the caster fork. Torque the bolt to 36.5–50 N • m (27–37 ft-lb).
g300687
1. Park the machine on a level surface and set the parking brake. Stop the
engine, wait for all moving parts to stop and remove the key.
2. Flip the seat forward.
3. Using a T–30 torque bit, remove the 3 screws securing the pod to the pod
support brackets. Repeat for opposite side.
Figure 67
Figure 68
Page 5–22 TIMECUTTER® Service Manual
3433-938 Rev A