Fuel Tank Installation (continued)
TIMECUTTER® Service Manual
3433-938 Rev A
g301705
2. Remove the cap from the hoses. Install the fuel hose and fuel vent hose to
the fuel tank fittings. Secure with spring clamps.
Note: The fuel hose and fuel vent hose ports and hose orientation are
labeled on the fuel tank.
g301704
3. Remove the fuel cap from the LH pod.
4. Install the LH pod into position on the machine.
5. Move the motion control from the neutral position to the neutral lock.
6. Install the fuel cap on the LH side pod.
7. Install the 3 screws (per pod) securing the pod to the pod support brackets.
Torque screws to 11 N • m (100 in-lb).
Figure 76
Figure 77
Page 5–27
Chassis: Service and Repairs