Toro TIMECUTTER 74685 Service Manual page 104

Steering Control Box Removal (continued)
Steering Control Box Disassembly
Chassis: Service and Repairs
g301898
1. Remove the T-30 screw securing the return to neutral from reverse spring to
the steering control box. Remove the return to neutral from reverse spring.
g301930
2. Remove the 9/16 inch nut and ¾ inch bolt securing the actuator arm to the
steering control box. Remove the actuator arm from the steering control box.
Figure 128
Figure 129
Page 5–54 TIMECUTTER® Service Manual
3433-938 Rev A