Toro TIMECUTTER 74685 Service Manual page 107

Steering Control Box Assembly (continued)
Steering Control Box Installation
TIMECUTTER® Service Manual
3433-938 Rev A
g301931
4. Install the return to neutral to the reverse spring. Install the T-30 screw
securing the return to neutral from reverse spring to the steering control box.
Torque screw to 11 N • m (100 in-lb).
g301930
1. Install the steering control box and seat rod to the machine. Install the 4
(number 30 torque) screws (4 per control box) securing the steering control
box to the chassis. Torque screws to 17–22.5 N • m (150–200 in-lb).
Note: When installing the RH steering control box, install the T-30 screw
securing the height-of-cut bracket chassis.
Figure 134
Figure 135
Page 5–57 Chassis: Service and Repairs