Toro TIMECUTTER 74685 Service Manual page 187

42 inch Stamped and 42/50/54/60 Inch Fabricated Deck Installation (continued)
TIMECUTTER® Service Manual
3433-938 Rev A
g302087
2. Install the wood blocks under the deck.
3. Install the front hanger rod to the deck. Install the cotter pin and washer
securing the front deck hanger to front deck weldment.
4. Lower the deck lift handle to the lowest position.
5. Install the rear lift arms to the deck weldments.
6. Install the cotter pin and washer (1 per side) to each side of the rear deck
weldment securing the rear of deck to the deck lift hanger.
7. Install the deck belt to the PTO clutch.
8. Using a spring puller, install the deck tension spring to the deck tension
spring anchor.
9. Raise the deck to add tension to the lift handle.
Figure 266
Page 7–15 Mower Deck System: Service and Repairs