Mechanical Control Error Code (04150 ~ 04165) - Konica Minolta REGIUS 190 Service Manual

4.4 Error Code
4.4.4

Mechanical Control Error Code (04150 ~ 04165)

04150 ~ 04165 indicates an error occurred on the firmware.
Error Error name
code
Lock initializing pro-
04150
cess
Insertion shutter initial-
04151
izing process
Cassette receive Unit
04152
initializing process
Justification initializing
04153
process
Transport Unit initializ-
04154
ing process
Subscan initializing
04155
process
Feed in operation 1
04156
start NG
Feed in operation 2
04157
start NG
04158 Insertion slot ejection
start NG
04159 Ejection start NG
Insertion slot shutter
04160
open NG
Insertion slot shutter
04161
close NG
156
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
Error description
Initialization of the lock motor
cannot be carried out as a result
of a problem in the firmware.
Initialization of the insertion slot
shutter motor cannot be carried
out as a result of a problem in the
firmware.
Initialization of the elevation-bed
motor cannot be carried out as a
result of a problem in the firm-
ware.
Initialization of the justification
motor cannot be carried out as a
result of a problem in the firm-
ware.
Initialization of the Transportation
Motor cannot be carried out as a
result of a problem in the firm-
ware.
Initialization of the auxiliary scan-
ning motor cannot be carried out
as a result of a problem in the
firmware.
Draw-in operation 1 could not be
carried out by the insertion slot
motor as a result of a problem in
the firmware.
Draw-in operation 2 could not be
carried out by the insertion slot
motor as a result of a problem in
the firmware.
An eject operation could not be
carried out by the insertion slot
motor as a result of a problem in
the firmware.
An eject operation could not be
carried out by the removal-port
motor as a result of a problem in
the firmware.
An opening operation could not
be carried out by the insertion slot
motor as a result of a problem in
the firmware.
A closing operation could not be
carried out by the insertion slot
shutter motor as a result of a
problem in the firmware.
Action
Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.