Konica Minolta REGIUS 190 Service Manual page 61

2.3 Insertion / Ejection Unit
Part Name
4 Insertion Guide SW
(SW4)
5 Insertion Motor (M1)
34
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
Function Access to the Part
Detects the insertion 1) Remove the insertion / ejection unit front cover.
guide position
2) Remove the insertion guide.
3) Remove tow fixing screws from the sensor.
4) Pull out the fasten terminal.
Adjustment when reinstalled.
Refer to
Switch (SW4),
Drives the insertion Refer to
roller
•Refer to "2.2.4 Removal of Insertion / Ejection Front Cover,
p.31".
•Refer to "2.3.5 Replacement of Insertion Nip Rollers,
•COM terminal; Black, NC terminal: Brown
"3.9 Adjusting the Position of Insertion Guide
p.125".
"2.3.6 Replacement of Insertion Motor,
p.41".
p.43".