3.4 Verification of Reading Operation
1)
Click [Standby pos.] of "Justify".
2)
Check that "Justification Standby Position ...OK" is
shown on "Information : " window.
3)
Click [Eject pos.] of "Cassette receive Unit".
4)
Check that "Cassette receive Unit Standby Position
...OK" is shown on "Information : " window.
5)
Check that the leading edge of the cassette is located
at the ejection slot.
13.
Ejects the cassette, and returns the transport unit to the
insertion position.
1)
Click [DC motors] tab.
2)
Click [Forward] of "Ejection roller".
3)
Ejects the cassette, and closes the ejection slot shutter.
4)
Click [Stop] of "Ejection roller".
114
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01