Konica Minolta REGIUS 190 Service Manual page 140

11.
After coupling the back plate with the front plate, transports
the cassette to the ejection position.
1) Click [Absorb pos.] of "Transport Unit".
2) Only when the cassette is mammo type, click [3mm up]
of "Sub scanning".
3) Check that "Transport Unit Magnetizing Position ...OK"
is shown on "Information : " window.
4) Click [DC motors] tab.
5) Click [Lock] of "Lock-release motor".
6) Check that "Lock...OK" is shown on "Information : " win-
dow.
7) Click [Stepping motors] tab.
8) Click [Eject pos.] of "Transport Unit".
9) Check that "Transport Unit Ejection Position ...OK" is
shown on "Information : " window.
12.
Cassette ejection operation starts.
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
3.4 Verification of Reading Operation
113