Konica Minolta REGIUS 190 Service Manual page 139

3.4 Verification of Reading Operation
9.
Subscanning operation starts.
1) Check that the "Cassette back plate sensor" of "Sen-
sor" is "ON".
2) Click [Sub scanning] of "Sub scanning".
• Cassette magnetizing plate elevates.
• Image reading by the optical unit will not be imple-
mented.
3) Check that [V-SYNC] of "Sensor" switches from "OFF"
to "ON".
4) Check that "Subscan : Subscanning ...OK" is shown on
"Information : " window.
10.
Erasing operation starts.
• Erasing lamp will not be turned on.
1) Click [Erase 1] of "Sub scanning".
2) Check that "Subscan: Erase 1 ...OK" is shown on
"Information : " window.
112
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01