Konica Minolta REGIUS 190 Service Manual page 212

SW2-8 Setting Mode
ON Nonexpanded
•
LCD Message Language
SW3-3 Setting Mode
OFF Japanese
ON English
• SW3-1, SW3-2, SW3-4, SW3-5, SW3-6, SW3-7, SW3-8 are spares.
•
Fine Adjustment of Magnetizing Position at Transport Unit.
SW4 Offset Value
0 +4.0mm
1 +4.5mm
2 +5.0mm
3 +5.5mm
4 -2.0mm
5 -1.5mm
6 -1.0mm
7 -0.5mm
8 0.0mm
9 +0.5mm
A +1.0mm
B +1.5mm
C +2.0mm
D +2.5mm
E +3.0mm
F +3.5mm
Description
Continuous operation without ejecting the cassette.
Description
Uses Japanese for the LCD message on the REGIUS 190.
Uses English for the LCD message on the REGIUS 190.
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
A.2 DIP Switch Setting
185