Konica Minolta REGIUS 190 Service Manual page 197

A.1 SCB2 Dummy Program Screens
Menu Menu Item
Command Stand-By (S)
Wake-Up (W)
Regist OK (K)
Power ON (P)
Network Error (N)...
SCB2 Error (B)...
View Maintenance Window (M)
Task Info....(T)
Data Change...(D)
Update Firm...(U)
Help DmySCB2 Version (A)...
170
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
Description
Sends "Switch to Standby" to the REGIUS 190 of READY
status, and changes its mode to standby.
Sends "Release from Standby" to the REGIUS 190 of
Standby status, and changes its mode to READY.
Sends "Registration OK" to the REGIUS 190 on which a
message "Not Registered" is displayed in "Manual Registra-
tion" mode, and reset the error message.
Transit "Dummy SCB2 Program" which has been put off due
to the power OFF initiated by pressing the "operation" button
of REGIUS 190 to running status again.
Sends a network error to the MCB2, and transits the
REGIUS 190 to the network error status.
Sends a SCB2 error to the MCB2, and transits the REGIUS
190 to the SCB2 error status. (p.175)
Displays the maintenance window. (p.176)
Acquiring the task information, and save it in the firmware of
MCB2.(p.182)
Acquires and changes various data from/on firmware of
MCB2.(p.181)
Installs the firmware of MCB2.(p.183)
Displays the current version information of the SCB2 soft-
ware.