Turning On The Positioner; Turning On The Positioner Control Panel; Emergency Stop Switch - Konica Minolta KDR AU DDR Operator's Manual

Advanced u-arm system with dynamic digital radiography
Table of Contents

Advertisement

III. USER INTERFACES

13.2 Turning On the Positioner

For instructions on turning on the entire system, see Section 9.1 "System Start Up," step 1.

13.3 Turning On the Positioner Control Panel

To turn ON the control panel, press the ON/OFF switch and hold it more than five seconds until it shows a beginning
screen (see Figure 13.3.1). Turning the panel OFF is unnecessary. The panel will automatically switch itself off within three
minutes after the main power is turned off.

13.4 Emergency Stop Switch

In case of a malfunction or unintended movement in the stand, press the emergency stop switch to stop the unit immedi-
ately (see Figure 13.4.1). Remove the obstruction from the path of the positioner. To re-enable movement of the position-
er, pull and twist the emergency stop switch. In case of a persistent malfunction, contact your service engineer concerning
the issue.
KDR
TM
AU-DDR Advanced U-Arm System with
Dynamic Digital Radiography (KDR AU DDR)
Figure 13.3.1
Positioner Control Panel
35
KMHA 500-000099
Revision D

Advertisement

Table of Contents
loading

Table of Contents