Konica Minolta REGIUS 190 Service Manual page 138

17) Click [DC motors] tab.
18) Click [Close] of "Insertion slot Shutter".
7.
Transports the cassette to the magnetizing (absorb) posi-
tion.
1) Click [Stepping motors] tab.
2) Click [Absorb pos.] of "Transport Unit".
3) Check that "Transport Unit Magnetizing Position ...OK"
is shown on "Information : " window.
8.
Releases the cassette open / close lock, and separates the
front plate from the back plate.
1) Click [DC motors] tab.
2) Click [Lock] of "Lock-release motor".
3) Check that "Lock ...OK" is shown on "Information : "
window.
4) Click [Stepping motors] tab.
5) Only when the cassette is mammo type, click [3mm
down] of "Sub scanning".
6) Click [Escape pos.] of "Transport Unit".
7) Check that "Transport Unit Escape pos. ...OK" is shown
on "Information : " window.
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
3.4 Verification of Reading Operation
Transport Motor (PM3)
111