Troubleshooting For Mechanical Troubles; Caution For Receiver Sensor Plunger - Konica Minolta REGIUS 190 Service Manual

4.2 Troubleshooting for Mechanical Troubles

4.2.1

Caution for Receiver Sensor Plunger

When attempting to remove the back plate
Caution
from the cassette magnetizing plate, always
couple the back plate with the front plate
first, then remove the cassette from the mag-
netizing plate. Removing the back plate
alone after removing the front plate may
cause the edge of the back plate to hit the
sensor plunger of the receiver, and may dam-
age the sensor plunger.
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
4.2 Troubleshooting for Mechanical Troubles
Receiver Sensor Plunger
135