Konica Minolta REGIUS 190 Service Manual page 134

9.
Check the initialization sequence of Transport Unit.
1) Click "Initialize" of "Transport Unit".
2) Check that "Transport Unit Initialize...OK" is shown on
"Information : "
10.
Move the Cassette receive Unit to the HP.
1) Click "Move to HP" of "Cassette receive Unit".
2) Check that "Cassette receive Unit to HP...OK" is shown
on "Information : ".
11.
Check the lock operation.
1) Click [DC motors] tab.
2) Click [Lock] of "Lock-release motor".
3) Check that "Lock...OK" is shown on "Information : ".
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
3.3 Verification of Initializing Sequence
107