Information" Window - Konica Minolta REGIUS 190 Service Manual

A.1.2 "Information" window
The "Information" window will appear in the right next to the
main window right after the start up of the dummy SCB2 pro-
gram.
Item
Bar Code Ins. Slot
Process
Hi Vol. ON
Laser ON
Booting
Power OFF
[Power ON] Button
Front Door Open
[Stand by]
[Wake Up]
[Regist OK]
Warning Ins. Slot
Ejc. Slot
Lamp
Read time
Description
Displays the bar code of the cassette which is inserted into the REGIUS 190
insertion slot.
Displays the bar code of the cassette which is being read on the REGIUS 190.
It is displayed in black when the high voltage ON status is sent from the MCB2,
and changes to halftone when "GoBackward" is sent.
It is displayed in black when the laser ON status is sent from the MCB2, and
changes to halftone when "GoBackward" is sent.
It is displayed in black when the software is waiting the initialization to complete,
and changes to halftone when Ready status is received from the MCB2.
It is displayed in black when the power OFF status is received from the MCB2.
When the REGIUS 190 is powered ON from the status where the REGIUS 190
has been OFF with the "Power OFF" button being displayed in black, click this
button.
It is displayed in black when "Front cover open status" is sent from the MCB2,
and changes to halftone when "Front cover close status" is sent from the MCB2.
Sends "Switches to standby" command to the MCB2.
Sends "Releases standby" command to the MCB2.
Sends "Register OK" command to the MCB2.
Displays the error occurred at the insertion slot.
Displays the error occurred at the insertion slot.
Displays the error relating to the lamp.
Displays the total number of reading implemented since the dummy SCB2 pro-
gram is started up.
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
A.1 SCB2 Dummy Program Screens
171