Konica Minolta REGIUS 190 Service Manual page 83

2.4 Transport Unit
•
Tension adjustment
1.
Remove 4 fixing screws, and remove the pulley cover for
justification mechanism.
2.
The width justification motor is to be secured in such a way
that a 2-mm deflection in the center of the belt will be
caused by a load of between 1 ~ 2.5 N (102 ~ 255 gf)
56
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
Cover for Justification Mechanism
Fixing Screws (4pcs)
Center of Belt
Justification Motor (PM2)