Konica Minolta REGIUS 190 Service Manual page 80

2.4 Transport Unit
Part Name
2 Lock-Release Sen-
sor (S1)
3 Lock-Release Motor
(M4)
Function Access to the Part
Detects the HP of 1) Remove the receiver assy.
release shaft.
2) Unplug a connector.
3) Remove the sensor from the release sensor bracket.
Actuate the release Refer to
shaft up and down (1
cycle)
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
•Refer to "2.4.2 Removal of the Cassette Receive Unit, p.54"
• JP20
"2.4.7 Unlock Motor (M4), p.61"
53