Konica Minolta REGIUS 190 Service Manual page 137

3.4 Verification of Reading Operation
6) Click [DC motors] tab.
7) Click [Forward High] of "Insertion roller".
8) Check that "Cassette on Cassette receive Unit Detect"
of "Sensor" is switched to ON.
9) Click [Stepping motors] tab.
10) Click [Transport pos.] of "Cassette receive Unit".
11) Check that "Cassette receive Unit at Transport Position
...OK" is shown on "Information : " window.
12) Click [DC motors] tab.
13) Click [Stop] of "Insertion roller".
14) Click [Stepping motors] tab.
15) Click [Justify] of "Justify".
16) Check that "Justification sensor L" and "Justification
sensor R" of "Sensor" turn "ON".
110
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01