Konica Minolta REGIUS 190 Service Manual page 23

Hide thumbs Also See for REGIUS 190:
Table of Contents

Advertisement

Ca ut ions d u rin g Se r v ic in g
The following cautions must be observed during servicing.
Cautions Relating to Personal
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
xvi
Safety
DANGER
The REGIUS MODEL 190 incorporates a laser generator (class
IIIb). Direct exposure of the body or the eyes to the laser will
result in serious injury. Special purpose protective goggles must
be worn while carrying out repairs or servicing.
• • • •
Only REGIUS MODEL 190 units with the multiple interlocks disengaged may
be treated as class-I laser products.
WARNING
The REGIUS MODEL 190 incorporates high-voltage parts which
pose the risk of electrocution if touched.
WARNING
To minimize risk, only properly trained service personnel are
allowed to remove covers or handle internal components, etc.
WARNING
When in the proximity of moving parts such as motors, care must
be exercised to ensure that parts of the body or clothing do
become tangled in the mechanism.
WARNING
Before removing or replacing internal circuit boards, or discon-
necting connectors or cables, the REGIUS MODEL 190 power
supply must be switched off. Carrying out such procedures with
the power on will result in serious injury and must always be
avoided.
• • • •
Work procedures should be carried out properly and safely with due regard
the descriptions of the warning labels.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dd-941

Table of Contents