Konica Minolta REGIUS 190 Service Manual page 179

4.4 Error Code
Error Error name
code
Justification R/L sen-
04022
sor NG (at absorption)
04023 Justification R/L sen-
sor NG (during
escape)
Justification R/L sen-
04024
sor NG (at ejection)
Justification HP sen-
04025
sor NG
04026 Justification sensor-R
NG (at initializing)
152
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
Error description
3) Cassette with a barcode that is
not registered or represents
wrong size is inserted.
1) The Justification Sensor was
OFF after the completion of
motion by the transport unit to
the absorption position during
cassette absorption.
2) The Justification Sensor was
OFF after lock release during
cassette absorption.
3) The Justification Sensor was
OFF after the completion of
motion by the transport unit to
the absorption position during
cassette ejection.
1) The Justification Sensor was
OFF after the completion of
motion by the transport unit to
the Escape Position following
cassette separation.
2) The Justification Sensor was
OFF after the completion of
erasure.
The Justification Sensor was OFF
after the completion of motion by
the transport unit to the eject posi-
tion during cassette ejection.
1) A time-out occurred for ON
detection by the HP sensor dur-
ing HP motion processing for
initialization by the justify- cat-
ion.
2) A limit-over occurred for ON
detection by the HP sensor dur-
ing HP motion processing by
the justification during cassette
ejection.
The right side of the Justification
Sensor was ON after completion of
HP motion processing for initializa-
tion by the justification.
Action
In the care of 3), remove the cassette,
and reset the printer to READY by per-
forming open/close of front cover.
Return the cassette to the plant.
• Check MCB2:CN11-, pins 9 through
11 (Justification Sensor- L);
MCB2:CN11-, pins 12 through 14
(Justification Sensor-R); and
MCB2:CN17 (Justification Motor)
• Check the loose of the drive pulley.
Refer to "2.4.3 Replacement of the
Justification Motor (PM2), p.55"
"3.8 Checking and Adjusting the
Justification Allowance, p.124"
• Check MCB2:CN11-, pins 9 through
11 (Justification Sensor- L);
MCB2:CN11-, pins 12 through 14
(Justification Sensor- R); and
MCB2:CN17 (Justification Motor)
• Check the loose of the drive pulley.
Refer to "2.4.3 Replacement of the
Justification Motor (PM2), p.55"
"3.8 Checking and Adjusting the
Justification Allowance, p.124"
• Check MCB2:CN11-, pins 9 through
11 (Justification Sensor- L);
MCB2:CN11-, pins 12 through 14
(Justification Sensor- R); and
MCB2:CN17 (Justification Motor)
• Check the loose of the drive pulley.
Refer to "2.4.3 Replacement of the
Justification Motor (PM2), p.55"
"3.8 Checking and Adjusting the
Justification Allowance, p.124"
Check MCB2:CN11-, pins 29 through 31
(Justification HP Sensor) and
MCB2:CN17 (Justification Motor)
• Check MCB2:CN11-, pins 12 through
14 (Justification Sensor- R)
• Check no foreign object is present in
the justification guide-R
and
and
and