Installing Options And Accessories - Siemens SINAMICS DCM Operating Instructions Manual

Transport, unpacking, installation
5.2 Installation
5.2.4

Installing options and accessories

5.2.4.1 AOP30 operator panel
Installation cut-out required in the cabinet door: 197.5 × 141.5 mm
5.2.4.2 Fuse monitoring distributor
The module can be snapped onto a mounting rail according to DIN EN 50022-35x7.5.
5.2.4.3 Installing a second CUD
NOTICE
Electrostatic-sensitive devices (ESD)
Note the information provided on "Electrostatic sensitive devices (ESD)" in Chapter 1.
Note
Use the supplied mounting aid. See Chapter "Replacing the CUD (Page 656)".
1.
Figure 5-14
52
Unlock and tilt up the BOP support
Installing a second CUD (1)
①
.
Operating Instructions, 12/2018, A5E34888669A
SINAMICS DCM Control Module