Siemens SINAMICS DCM Operating Instructions Manual page 31

Ordering information for cable sets
The SINAMICS DCM Control Module is supplied with front and rear plates mounted one on
top of the other. The correct ribbon cables for this mounting type are already in place.
The cable sets listed below for connecting components (printed circuit boards or their parts)
in the case of other mounting types (see Chapter "Connecting (Page 55)") are available on
request.
Table 2- 5 Ordering information for cable sets
Product description
Set of loose parts
Set of loose parts
Prefabricated ribbon cable
bridge set: for connecting the
two plates when mounted at a
distance from each other
Prefabricated ribbon cable
bridge set: for connecting the
two plates when mounted at a
distance from each other
Prefabricated bridge set for
current transformer
SINAMICS DCM Control Module
Operating Instructions, 12/2018, A5E34888669A
Contents
Rear enclosure part including
accessories for mounting the
firing pulse transformer module
and/or fuse monitoring module
with a parallel connection
Screws, stud bolts, and snap-
on parts for the external
mounting of module parts
2 x 26-pin ribbon cable,
shielded (L = 3 m)
1 x 10-pin ribbon cable,
shielded (L = 3 m)
1 x 20-pin ribbon cable,
shielded (L = 3 m)
1 x RJ45 patch cable
shielded (L = 3 m)
2 x 26-pin ribbon cable,
shielded (L = 10 m)
1 x 10-pin ribbon cable,
shielded (L = 10 m)
1 x 20-pin ribbon cable,
shielded (L = 10 m)
1 x RJ45 patch cable
shielded (L = 10 m)
2x 2-pin twisted cables
(L = 2 m)
2.3 Ordering information for options and accessories
For connecting
from X21A, X22A on PCB "Power
interface for the Control Module" to
X21A, X22A on PCB "Firing
pulse transformer module"
X23B on PCB "Power interface for
the Control Module" to X23B on
PCB "Fuse monitoring"
XF1 on PCB "Power interface for the
Control Module" to XF1 on PCB
"Field supply power unit"
X45 on PCB "Power interface for the
Control Module" to X45 on PCB
"Voltage measurement"
from X21A, X22A on PCB "Power
interface for the Control Module" to
X21A, X22A on PCB "Firing pulse
transformer module"
X23B on PCB "Power interface for
the Control Module" to X23B on
PCB "Fuse monitoring"
XF1 on PCB "Power interface for the
Control Module" to XF1 on PCB
"Field supply power unit"
X45 on PCB "Power interface for the
Control Module" to X45 on PCB
"Voltage measurement"
XB on PCB "Power interface for the
Control Module" to the current
transformers
Ordering information
Article no.
6RY1805-0CM00
6RY1807-0CM00
6RY1807-0CM01
6RY1807-0CM02
6RY1707-0CM03
29