Brake Control - Siemens SINAMICS DCM Operating Instructions Manual

Commissioning
8.5 Commissioning with the STARTER commissioning tool

Brake control

Figure 8-23 Configuring a motor brake
⇒ Under configuration of the motor brake, select the corresponding setting for your device
configuration:
● [0] No brake
● [1] Holding brake
● [2] Operating brake
⇒ When selecting a motor brake, additionally set the release time and the closing time.
⇒ Click Next >
272
SINAMICS DCM Control Module
Operating Instructions, 12/2018, A5E34888669A