12-Pulse Parallel Connection - Siemens SINAMICS DCM Operating Instructions Manual

10.26.2

12-pulse parallel connection

Note
12-pulse applications
The circuit diagrams in this chapter are block diagrams.
You can find detailed information on interconnecting, dimensioning and parameterizing in the
application document "12-pulse applications".
Support is also available through our Technical Support organization (for contact address,
see "Preface (Page 3)").
Topology
The following diagram shows the topology of a 12-pulse parallel connection.
Figure 10-77 12-pulse parallel connection (1), block diagram
The following diagram shows the topology of a 12-pulse parallel connection, where an
additional 6-pulse converter is connected in parallel to each of the two 12-pulse converters
connected in parallel.
SINAMICS DCM Control Module
Operating Instructions, 12/2018, A5E34888669A
Descriptions of functions
10.26 Connecting units in parallel and in series
571