Siemens SINAMICS DCM Operating Instructions Manual page 303

8.7.3.2 Adding offline in STARTER
In Starter, CBE20 is added when working through the drive wizard.
Figure 8-44 Activating the CBE20 option module
● Select the option module CBE20.
● Work through the wizard up to the end and load the expanded project into the drive.
● You can then access the parameters for the CBE20.
SINAMICS DCM Control Module
Operating Instructions, 12/2018, A5E34888669A
8.7 Commissioning optional additional modules
Commissioning
301