Siemens SINAMICS DCM Operating Instructions Manual page 33

Product description
Prefabricated bridge set for
controlling firing pulse
transformers
Prefabricated bridge set for
mounting plates next to each
other
SINAMICS DCM Control Module
Operating Instructions, 12/2018, A5E34888669A
Contents
2x 12-pin twisted cables
(L = 10 m)
2 x 26-pin ribbon cable,
shielded (L = 0.68 m)
1 x 10-pin ribbon cable,
shielded (L = 0.5 m)
1 x 20-pin ribbon cable,
shielded (L = 0.76 m)
1 x RJ45 patch cable
shielded (L = 1 m)
2.3 Ordering information for options and accessories
For connecting
from XIMP1, XIMP4 and/or XIMP2,
XIMP5 and/or XIMP3, XIMP6 on
PCB "Firing pulse transformer
module" to external firing pulse
transformers
from X21A, X22A on PCB "Power
interface for the Control Module"
to X21A, X22A on PCB "Firing pulse
transformer module"
X23B on PCB "Power interface for
the Control Module" to X23B on
PCB "Fuse monitoring"
XF1 on PCB "Power interface for the
Control Module" to XF1 on PCB
"Field supply power unit"
X45 on PCB "Power interface for the
Control Module" to X45 on PCB
"Voltage measurement"
Ordering information
Article no.
6RY1707-0CM10
6RY1807-0CM11
31