Siemens SINAMICS DCM Operating Instructions Manual page 259

The STARTER project wizard
Figure 8-7
⇒ Click Arrange drive units offline... in the STARTER project wizard
Figure 8-8
⇒ Enter a project name and, if necessary, the author, memory location and a comment.
⇒ Click Next > to set up the PG/PC interface.
SINAMICS DCM Control Module
Operating Instructions, 12/2018, A5E34888669A
8.5 Commissioning with the STARTER commissioning tool
STARTER project wizard
Creating a new project
Commissioning
257