2.
3.
Figure 5-15
4.
Figure 5-16
SINAMICS DCM Control Module
Operating Instructions, 12/2018, A5E34888669A
Mount the CUD and push it into the connectors for the left-hand CUD.
Secure the CUD using four screws (screw and washer assembly, M3×6), tightening torque 1 Nm
Installing a second CUD (2)
Lock the BOP support again.
CAUTION: Do not clamp the BOP cable
Installing a second CUD (3)
Transport, unpacking, installation
5.2 Installation
53