Installation - Siemens SINAMICS DCM Operating Instructions Manual

Control module

Hide thumbs Also See for SINAMICS DCM:

Table of Contents

Installation

1. Tilt the component backwards slightly and attach it to the DIN rail using the hooks.

2. Swivel the component onto the DIN rail until you hear the mounting slide at the rear latch

into position.

3. Slide the components along the mounting rail to either the left or right up to their final

1. First shift the mounting slide downwards at the lug to release the interlocking with the

mounting rail.

2. Swivel the component to the front and withdraw it upwards from the DIN rail.

SINAMICS DCM Control Module

Operating Instructions, 12/2018, A5E34888669A

Mounting slide

Standard mounting rail

Removing from a mounting rail

Additional system components

7.5 Terminal Module TM31

Sinamics dc master