Siemens SINAMICS DCM Operating Instructions Manual page 51

External mounting of module parts
The parts required are not included in the scope of delivery, but are available as a "set of
loose parts" under article no. 6RY1807-0CM00.
The three snap-on parts
the terminal strip with spacer rollers
Figure 5-10
The two snap-on parts
small control boards with M3x8 screws
Figure 5-11
SINAMICS DCM Control Module
Operating Instructions, 12/2018, A5E34888669A
①
for the DIN rail, which satisfies DIN EN 50022-35x7.5, are mounted on
②
External mounting of the terminal strip
①
for the DIN rail, which satisfies DIN EN 50022-35x7.5, are mounted on the
②
External mounting of the small firing pulse transformer boards
③
and M3x16 screws .
.
Transport, unpacking, installation
5.2 Installation
49