Siemens SINAMICS DCM Operating Instructions Manual page 30

Ordering information
2.3 Ordering information for options and accessories
Article
CBE20 PROFINET
Memory card (equivalent to spare part for options S01 and S02)
Terminal Module TM15
Terminal Module TM31
Terminal Module TM150
Sensor Module Cabinet-Mounted SMC10
Sensor Module Cabinet-Mounted SMC30
SICROWBAR overvoltage protection
Fuses, reactors, filters
STARTER commissioning tool
Drive Control Chart (DCC) for SINAMICS
Drive Control Chart (DCC) for SINAMICS and SIMOTION
Please contact your local Siemens office.
1)
See Chapters "Line reactors (Page 112)" and "Fuses (Page 116)" or contact your local Siemens office
2)
Table 2- 4 Article numbers for the Advanced Operator Panel AOP30
Article
Advanced Operator Panel AOP30
RS485 connecting cable for connecting the AOP30 to one CUD; 3 m
RS485 connecting cable for connecting the AOP30 to two CUDs; 3 m
Additional cable lengths can be ordered as option.
When ordering the RS485 cable with option, the suffix "-Z" must be attached to the article number followed by the order
code for the required option.
Ordering example for a 35 m long cable:
Article number: 6RY1807-0AP00-Z, order code: K35
Cable length
5 m
10 m
15 m
20 m
25 m
30 m
35 m
40 m
45 m
50 m
28
Article number
6SL3055-0AA00-2EB0
6RX1800-0AS01
6SL3055-0AA00-3FA0
6SL3055-0AA00-3AA0
6SL3055-0AA00-3LA0
6SL3055-0AA00-5AA3
6SL3055-0AA00-5CA2
1)
2)
6SL3072-0AA00-0AG0
6AU1810-1HA20-1XA0
6AU1810-1JA20-1XA0
Article number
6SL3055-0AA00-4CA5
6RY1807-0AP00
6RY1807-0AP10
Order code
K05
K10
K15
K20
K25
K30
K35
K40
K45
K50
SINAMICS DCM Control Module
Operating Instructions, 12/2018, A5E34888669A