Installing The Starter Commissioning Tool - Siemens SINAMICS DCM Operating Instructions Manual

Commissioning
8.5 Commissioning with the STARTER commissioning tool
8.5.1.1

Installing the STARTER commissioning tool

Download STARTER here: STARTER download
(https://support.industry.siemens.com/cs/de/en/ps/13437/dl).
STARTER is installed using the "setup" file. When you double-click the "Setup" file, the
installation wizard guides you through the process of installing STARTER.
8.5.1.2 Layout of the STARTER user interface
STARTER provides these 4 operating areas:
Figure 8-5
Operating area
①
Toolbars
②
Project navigator
③
Working area
④
Detail view
254
STARTER operating areas
In this area, you can access frequently used functions by clicking icons.
The elements and objects contained in the project are displayed in this area.
Changes to the drive units are made in this area.
This area displays detailed information, for instance about faults and alarms.
Explanation
SINAMICS DCM Control Module
Operating Instructions, 12/2018, A5E34888669A