About The Asset Management Service; Sign Your Tester Out Of Linkware Live; Sign In To Linkware Live From A Desktop Or Mobile Device - Fluke Versiv Series Technical Reference Handbook

Versiv Series Cabling Certification Product Family
Technical Reference Handbook

About the Asset Management Service

LinkWare Live's asset management service lets you see the
locations of your testers in the field. The owner of the LinkWare
Live account can enable or disable the service remotely for each
tester.
When this service is enabled on a tester, the asset management
icon ( ) shows on the tester's home screen. When a technician
uses the tester to sign in to LinkWare Live, the tester's location
shows on a map on LinkWare Live's ASSETS page.
You can enable or disable the asset management
service only with LinkWare Live. There is no
setting on the tester that enables or disables this
service.

Sign Your Tester Out of LinkWare Live

On the home screen, tap the TOOLS icon, then tap Sign In.
1
On the LWL SIGN IN screen, tap SIGN OUT.
2
Or, turn off the tester.

Sign In to LinkWare Live from a Desktop or Mobile Device

Go to https://www.linkwarelive.com/signin.
1
Enter your LinkWare Live user name and password, then click
2
SIGN IN.
For more information about how to use LinkWare Live, click HELP
on the LinkWare Live web page.
566
Note