Optifiber Pro Connectors, Keys, And Leds - Fluke Versiv Series Technical Reference Handbook

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
SmartLoop

fibers in a link.
DataCenter OTDR

do tests on fiber installations that have short links, many
connections, and possibly large reflections.
FaultMap

patch cords as short as 0.5 m, and see events that have poor
reflectance.
Visual fault locator helps you verify the continuity of fibers

and locate faults in fibers and connectors.
Optional video probe lets you inspect fiber endfaces and save

the images in test reports.

OptiFiber Pro Connectors, Keys, and LEDs

Refer to Figure 128.
LCD display with touchscreen.

Singlemode OTDR port with interchangeable SC adapter and

protective cap. The LED in front of the port turns on when the
port emits an optical signal.
Do not look directly into optical connectors. Some
sources emit invisible radiation that can cause
permanent damage your eyes.
Do not connect APC (angled physical contact)
connectors to the OTDR ports. An APC connector
can damage the UPC fiber endface in the ports.
 Multimode OTDR port with interchangeable SC adapter and
protective cap. The LED in front of the port turns on when the
port emits an optical signal.
304
™ test: One test gives you OTDR results for both
™
test gives optimal performance when you
™
test lets you make maps of your cable plant, see
W
Warning
W
Caution
*