Manage Results On A Flash Drive - Fluke Versiv Series Technical Reference Handbook

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
To make a new project and move the results to the new

project, tap NEW PROJECT, enter a project name, tap
DONE, then tap MOVE in the confirmation dialog.
When you move results to a different project, that
project becomes the active project.

Manage Results on a Flash Drive

You can export or import results to or from a flash drive, and
delete results on the flash drive.
To export or import project settings along with results, see
"Manage Projects on a Flash Drive" on page 554.

Do not remove the USB flash drive while the LED on
the drive flashes. Doing so can corrupt the data on
the drive.

You can lose a USB flash drive, cause damage to it,
or accidentally erase the contents of the drive. Thus,
Fluke Networks recommends that you save no more
than one day of test results on a flash drive or that
you upload results to LinkWare Live.
The tester reads only USB drives that use the FAT
format.
Connect a USB flash drive to the type A USB port. The tester
1
makes a bell sound when it detects the drive.
On the home screen, tap the RESULTS icon, then tap
2
TRANSFER.
On the TRANSFER RESULTS screen, tap USB Flash Drive, then
3
tap a function.
510
Note
W
Caution
Note