Settings For Coaxial Tests - Fluke Versiv Series Technical Reference Handbook

Settings for Coaxial Tests

Table 6 gives descriptions of the settings for coaxial tests. To set
up a project, which includes the settings in Table 6, cable IDs, and
operator names, see Chapter 17.
To set up a coaxial test
On the home screen, tap the test setup panel.
1
On the CHANGE TEST screen, select a coaxial test to change,
2
then tap EDIT.
Or to set up a new coaxial test, tap NEW TEST. If no module is
installed, the MODULE screen shows. Tap DSX-8000
CableAnalyzer or DSX-5000 CableAnalyzer.
On the TEST SETUP screen, tap the panels to change settings
3
for the test. See Table 6.
On the TEST SETUP screen, tap SAVE when your test setup is
4
completed.
On the CHANGE TEST screen, make sure the button next to
5
the test is selected, then tap USE SELECTED.
Chapter 5: Certify Coaxial Cabling
Settings for Coaxial Tests
167