Certifiber Pro Olts Module Specifications; Certifiber Pro Power Meter Specifications - Fluke Versiv Series Technical Reference Handbook

CertiFiber Pro OLTS Module Specifications

CertiFiber Pro Power Meter Specifications

Input connector
Detector type
Wavelengths
Power measurement
range
Display resolution
Display update rate
Power measurement
uncertainty (accuracy)
Measurement linearity
Re-calibration period
 5 %
100 pW at 850 nm
1.
2. Under the following conditions:

Power level 100 μW (-10 dBm), continuous wave (CW) for absolute power at
850 nm and 1310 nm.

Divergent beam, NA = 0.20 for 50/125 μm and NA = 0.14 for 9/125 μm.

Ambient temperature 23° ± 1 °C.

SC/UPC connector with ceramic ferrule.

After a 5 minute warm-up.

Traceable to NIST.
3. -3 dBm to -55 dBm at 850 nm and 1310 nm. Ambient temperature 23 °C ± 1 °C.
After a 5 minute warm-up.
CertiFiber Pro OLTS Module Specifications
Interchangeable connector adapter
(LC standard)
InGaAs
850 nm, 1310 nm, 1550 nm
850 nm: +10 dBm to -65 dBm
All other wavelengths: +10 dBm to -70 dBm
dB, dBm: 0.01
Linear (nW, μW, mW): 0.001 to 9.999, 10.00 to 99.99,
100.0 to 999.9 depending upon value
1 reading per second
 5 %  32 pW
1,2
<  0.1 dB
3
1 year
Chapter 21: Specifications
619