How To See The Tester's Mac Address; Use Linkware Live Through A Wired Ethernet Network - Fluke Versiv Series Technical Reference Handbook

Versiv Series Cabling Certification Product Family
Technical Reference Handbook

How to See the Tester's MAC Address

Some networks require users to register their device's MAC
address before they can connect to the network.
There are two MAC addresses: one for the wired port and one for
the Wi-Fi port.
Versiv 2 testers have an internal Wi-Fi radio. Versiv testers use an
external adapter to connect to Wi-Fi networks.
To see the tester's MAC address
For a Versiv that uses an external Wi-Fi adapter, connect the
1
adapter to the tester's USB port.
On the home screen tap TOOLS, then tap Network.
2
On the NETWORK screen, tap the Wired or Wi-Fi panel. The
3
MAC addresses shows at the top of the WIRED and WI-FI PORT
screens.
Use LinkWare Live Through a Wired Ethernet
Network
Use an appropriate cable to connect the tester's RJ45 Ethernet
1
port to an active network port. If the cable is good and the
port is active, the LEDs on the tester's port will come on.
On the home screen, make sure the Operator name is correct.
2
The tester uses the email address associated with the operator
name as the ID when you sign in to LinkWare Live.
If no address is associated with the name, or if you enter a
different address on the LWL SIGN IN screen, the tester
associates the name with the address you enter.
On the home screen, tap SYNC.
3
When the tester connects to the network, the wired network
4
connection icon shows at the top of the screen:
558