Internal Memory Capacity For Test Results; Usb Flash Drive - Fluke Versiv Series Technical Reference Handbook

Internal Memory Capacity for Test Results

Typical capacity for the internal memory depends on the type of
tests you save and the version of the main tester you use:
DSX CableAnalyzer, Cat 6A Autotest results, with plot data
included
 Versiv: 12,000
Versiv 2: 25,000

CertiFiber Pro Autotest results
Versiv: 30,000

Versiv 2: 30,000

OptiFiber Pro OTDR Autotest results, 10 km multimode fiber
 Versiv: 4,500
Versiv 2: 9,800

The capacity available for test results also depends on the space
used by the software and custom test limits in the tester.
The number of test records you can save decreases if you save
more tests in each record, or if you save tests that use more
memory. For example, twisted pair results saved with plot data
use more memory than results without plot data.

USB Flash Drive

You can upload test results to a USB flash drive to make more
internal memory available.
The tester reads only USB drives that use the FAT
format.
Chapter 21: Specifications
Internal Memory Capacity for Test Results
Note
631