Step 7: Look at the Results
The tester shows the Autotest results in two formats (Figure 14):
The first screen shows the worst-case results for each fiber.
To see more details about a fiber, tap a result window.
Figure 14. Examples of Fiber Autotest Results Screens
Step 8: Save the Results
Tap SAVE (if the result was PASS) or FIX LATER (if the result
8-1
was FAIL).
On the SAVE RESULT screen, tap the Cable ID box, use the
8-2
keyboard to enter an ID for the results, then tap DONE.
Tap SAVE.
8-3
Chapter 2: Get Started
Tutorial: Certify Fiber Optic Cabling
GPU144.EPS
51