Fluke Versiv Series Technical Reference Handbook page 415

Optional OTDR
port protector
patch cord*
(30 cm, 12 in)
Main tester with
OTDR module
*Optional for tests in one direction. Recommended for bi-directional tests
to protect the OTDR port from wear. These cords are available from
Fluke Networks.
Figure 154. SmartLoop Launch Compensation Connections
Chapter 11: The OptiFiber Pro OTDR Module
UPC
The SmartLoop Test
Loopback cord
Adapters
Launch cord
Tail cord
GPU170.EPS
379