Fluke Versiv Series Technical Reference Handbook page 199

Hide thumbs Also See for Versiv Series:

Table of Contents

Chapter 4: Test Twisted Pair Through a PoE Device (DSX-5000)

To isolate faults when the tester shows limited wire

map information, turn off the AC wire map test,

then do tests on the cabling after the PoE device.

Also do a test on the patch cord that connects the

PoE device to the link.

Open on pair 4,5. The open is 17 m

from the tester and 1.8 m from the

remote. The open is on one or both

Figure 73. AC Wire Map Examples: Open and Short

Short between pairs 1,2 and 3,6.

The short is 5 m from the remote.

The short is between two, three,

or all four wires.

AC Wire Map Results

Show Quick Links

Table of Contents