Editing Events In Bi-Directional Results - Fluke Versiv Series Technical Reference Handbook

Versiv Series Cabling Certification Product Family
Technical Reference Handbook

Editing Events in Bi-directional Results

When you edit an event in a bi-directional result, the tester copies
your change to the result you got from the other end and to the
averaged result. The tester copies your change to these events:

Loss

Reflection

Gainer

Ghost Source

Hidden
In some situations, the tester will not copy your change:
The tester will not copy your change to events not listed

above, such as Launch, Tail, and Bend events.
The tester will not copy your change if it did not calculate

averaged bi-directional results. This can occur, for example, if
you did the End 1 and End 2 tests with different wavelengths
or if a span was defined when you did the test.
The tester will not copy your change to the results from the

other end if there was not an event at the correct location.
But the change will show in the averaged results.
484